Backflow Testing Near Me: Georgia
Backflow Testing in Georgia: Costs, Requirements & How to Find the Best Certified Testers
Georgia testers must be certified by the Georgia Environmental Protection Division (EPD) — the state issues its own tester credential. Atlanta's metro growth, Savannah's industrial port economy, and Georgia's agricultural south all create strong annual backflow testing demand. EPD can require your water system to develop a cross-connection control plan at any time, and records must be kept for at least three years.
Why Backflow Testing Matters in Georgia
Georgia’s cross-connection control program is state-administered through the Georgia Environmental Protection Division (EPD), which holds EPA primacy and issues its own tester certification. Atlanta’s explosive growth has made it one of the Southeast’s most active backflow testing markets: the City of Atlanta Department of Watershed Management, Gwinnett County Water Resources, Cobb County Water System, Cherokee County Water Authority, and dozens of other metro Atlanta utilities all require annual testing. Georgia’s agricultural economy — poultry processing in Gainesville and Moultrie, peanuts and cotton in the coastal plain, peaches in the Middle Georgia corridor — creates specialized industrial cross-connection needs. Savannah’s industrial port and Hardeeville-area Mega Site industrial park represent growing commercial backflow compliance markets. Augusta’s medical corridor and Columbus’s Fort Moore (formerly Fort Benning) military presence create institutional compliance demands.
Georgia Backflow Testing Law — The Plain-Language Version
Georgia testers must hold current Georgia EPD certification — not just national ASSE or ABPA credentials. Water systems may be required to develop a cross-connection control plan at EPD’s request. Annual testing required for all covered assemblies. Records retained for at least 3 years. Major utilities: City of Atlanta DWM, Gwinnett County Water, Cobb County Water, Clayton County Water Authority, Cherokee County Water, Augusta Utilities, Savannah-area utilities, Columbus Water Works.
Full Georgia Backflow Law Details
Complete regulatory breakdown, certified tester requirements, and utility-specific programs: getyourbackflowtested.com/backflow-laws/georgia-backflow-prevention-laws
How Much Does Backflow Testing Cost in Georgia?
Metro Atlanta (City of Atlanta DWM, Gwinnett, Cobb, Clayton, Cherokee, Fulton County): $60 – $140 per assembly. Very high-volume market; competitive pricing on residential irrigation.
Savannah metro (Savannah-area utilities, Pooler, Richmond Hill): $65 – $135 per assembly.
Augusta (Augusta Utilities, Columbia County Water): $60 – $125 per assembly.
Columbus, Macon, Albany: $60 – $120 per assembly.
North Georgia mountains (Gainesville, Rome, Dalton, Blue Ridge): $65 – $130 per assembly.
South Georgia agricultural corridor (Valdosta, Thomasville, Moultrie, Tifton): $60 – $125 per assembly; agricultural irrigation testers serve this region.
How Long Does Alabama Backflow Testing Take?
A standard backflow preventer test in Alabama takes 20 to 45 minutes per assembly from the time the tester arrives on-site. Your water will be off for most of this period — typically 15 to 30 minutes — while the tester installs their differential pressure gauge, runs the test protocol, and verifies results. For a single residential irrigation assembly in Hoover, Vestavia Hills, or Madison, the entire appointment from arrival to departure is usually under an hour. For a large commercial facility in downtown Birmingham or a hospital in Huntsville with multiple assemblies, plan for a half-day to full-day visit.
After the test, the tester should provide you with a printed or digital copy of the test report on the ADPH-approved form. They are then responsible for submitting the results to your water utility within the required window — confirm this has been done within 5 business days if your utility uses an online portal.
What to Expect on Test Day
Your certified tester will arrive, locate your backflow assembly (typically near the water meter or at the service entrance), connect calibrated differential pressure test equipment to the assembly’s test cocks, and run the protocol required for your assembly type. Water is off during the test — typically 15 to 30 minutes. You’ll receive a signed test report on the spot. If the assembly passes, the tester files results with your water utility. If it fails, the tester identifies the fault and either repairs on the spot or schedules a return for repair and retest within the required compliance window. Ask your tester to confirm they have filed your results with your utility before they leave the property.
How We Vet Georgia Backflow Testers — Our Selection Criteria
Every tester listed in our Georgia city pages meets all of the following requirements before inclusion:
Georgia EPD certification: Verified current state-issued Georgia EPD tester credential. National credentials alone are insufficient in Georgia — EPD certification is required.
Utility registration: Confirmed with Atlanta DWM, Gwinnett, Cobb, or the relevant GA utility.
3-year records compliance: Testers confirm documentation practices meet Georgia’s 3-year retention standard.
Agricultural experience: For south Georgia listings, agricultural irrigation cross-connection experience noted.
Calibrated equipment + insurance: Standard requirements.
Georgia Cities and Areas We Cover
Metro Atlanta: Atlanta, Sandy Springs, Roswell, Alpharetta, Johns Creek, Duluth, Lawrenceville, Norcross, Tucker, Decatur, Smyrna, Marietta, Kennesaw, Woodstock, Canton, Cumming, Gainesville, Peachtree City, Fayetteville, Newnan, McDonough, Stockbridge, Conyers. Savannah metro: Savannah, Pooler, Richmond Hill, Rincon, Hinesville. Augusta: Augusta, Martinez, Evans, Grovetown, Harlem. Columbus, Macon, Albany, Valdosta, Brunswick. Statewide Georgia coverage.
Find a Certified Georgia Backflow Tester Near You
Browse our vetted Georgia backflow tester directory at getyourbackflowtested.com/backflow-testing-near-me/georgia-backflow-testing
getyourbackflowtested.com | Backflow Testing in Georgia